- 4th generation Snapdragon 8s
- dual loop 3D ice cooling
- 7550mAh Xiaomi Jinshajiang battery*
- 6.83-inch ultra-narrow edge large screen
- metal frame
- flagship 1.5K high-gloss eye protection screen
- Xiaomi Qingshan eye protection
- Sony large aperture super-sensing camera
- IP68 dust and water resistance*
- Wet hand touch 2.0
- TÜV SÜD five-star excellent quality certification for the whole machine
- Dual-frequency GPS + Tri-frequency Beidou
* 7550mAh is the typical battery capacity of REDMI Turbo 4 Pro.
* IP68, 2-meter waterproof means that under controlled laboratory conditions, the effect reaches IP68 level under GB/T4208-2017 standard. The test conditions are: (1) no flowing water, water depth of 2 meters; (2) test time 30 minutes; (3) the temperature difference between water and product is no more than 5℃. Splashproof, waterproof and
dustproof functions are not permanent, and the protection performance may decrease due to daily wear and tear. Do not charge the phone when it is wet. Damage caused by immersion in liquid is not covered by the warranty. The product has passed TÜV SÜD five-star excellent quality certification for complete devices,
certificate number Z2GCN 099551 0489.
Good looking, even better in fighting!

Turbo 4 Pro
Harry Potter Edition
black
green
White
Dimensions
Length: 163.10mm
Width: 77.93mm
Thickness: 7.98mm
Weight: 219g
Note: The above data is from Xiaomi laboratory testing. The actual results may vary slightly due to different measurement methods in the industry.
Mobile Platform
Fourth-generation Snapdragon 8s
Process technology: TSMC 4nm process
CPU: octa-core processor, maximum frequency 3.21 GHz
GPU: Adreno 825
AI engine: Qualcomm Hexagon NPU
Memory capacity
16GB + 1TB maximum optional
Memory: 12GB / 16GB
Storage: 256GB / 512GB / 1TB
LPDDR5X high-speed memory
UFS 4.1 high-speed flash memory
Note: The actual available capacity will be reduced and vary due to many factors: Since the operating system occupies part of the memory (RAM), the actual available space is less than
the indicated memory capacity; since the installation of the operating system and pre-installed programs occupies part of the flash memory (ROM), the actual available storage space is less than the indicated flash memory capacity.
Screen Display
Flagship 1.5K high-gloss eye protection screen
Size: 6.83 inches
Cover glass: Corning® Gorilla® Glass 7i
Resolution: 2772 x 1280
Contrast ratio: 8,000,000:1
Typical brightness: 800 nits
Global excitation brightness: 1800 nits
Multi-scene peak brightness: 3200 nits
Screen refresh rate: Up to 120 Hz
Touch sampling rate: Up to 480 Hz
Instantaneous touch sampling rate: 2560 Hz*
3840Hz high-frequency PWM dimming eye protection|12bit color depth|DCI-P3 color gamut|Professional primary color screen|Multi-screen same color
low blue light classic eye protection|Paper eye protection|Rhythm eye protection 2.0 | HDR10+|HDR Vivid | Dolby Vision
under-screen optical fingerprint|Dark light unlock|Wet hand touch 2.0 | Ultra dynamic display|TÜV Rheinland triple certification
visual health friendliness S++ certification|Tel five-star precise and smooth touch certification
* 2560Hz instantaneous sampling rate is only effective in some games and there are differences between different software versions. Please refer to the actual system support for specific details.
Battery life and charging
7550mAh(typ) / 7410mAh(min)
Built-in lithium-ion polymer battery, non-removable
Xiaomi Pengpai P2 fast charging chip
Xiaomi Pengpai G1 battery management chip
90W Xiaomi Surge Wired Fast Charge / 22.5W Wired Reverse Fast Charge*
The phone supports QC3+ / PD2.0 / PD3.0 fast charging protocols
USB Type-C double-sided charging interface
comes standard with a 90W charger, compatible with PD charging protocol
* Supports up to 22.5W wired reverse charging, and supports reverse charging of devices tested by Xiaomi laboratories.
* 90W Xiaomi Surge Wired Second Charge means the charger has an output power of 90W. The actual power will vary depending on the environment and must be used with a Xiaomi 90W wired charger.
Imaging System
50-megapixel Sony large aperture main camera
Sony's LYT-600 sensor|6P|f/1.5 large aperture|1/1.95" large bottom
1.6μm 4in1 large pixel|OIS optical image stabilization
8-megapixel ultra-wide-angle lens
20-megapixel HD portrait front camera
Howe OV20B|4P|f/2.2|1/4"
Everything in focus|Film filter|Standard watermark|Card watermark|Film watermark|UHD portrait|Real-time text extraction
document mode|Mask movie frame|Touch screen photography|Gesture photography|Voice-activated photography||Floating shutter button|Countdown
prompter|Dynamic photo 2.0|ID card copy mode|Slide left and right to take 50 photos at high speed|Panorama|Slow motion
time-lapse photography|Night scene (video recording)|Portrait|UHD 50MP|Long exposure
4K video recording: 30 / 60fps
1080p video recording: 30 / 60fps
1080p slow-motion video recording: 120 / 240 / 960fps
720p video recording: 30fps
720p slow-motion video recording: 120 / 240 / 960fps
1080p video recording: 30 / 60fps
720p video recording: 30fps
720p slow motion video recording: 120fps
Fill light|Countdown|Gesture photo|Touch screen photo|Voice control photo|Time-lapse photography|Prompter|
Standard watermark for dynamic photos|Card watermark|Beauty|Filter|Portrait|Slow motion
Network frequency band
Supported frequency bands
5G: n1/n3/n5/n8/n28A/n38/n40/n41/n48/n66/n77/n78
Supports dual Nano-SIM card slots, 5G network for all operators①Supports
China Mobile/China Unicom/China Telecom/China Broadcasting②5G/4G/3G/2G③Supports
dual-SIM dual-pass, dual-SIM HD voice④
4G: FDD-LTE: B1/B3/B4/B5/B8/B19/B28A/B66
TDD-LTE: B34/B38/B39/B40/B41/B42/B48
3G: WCDMA: B1/B4/B5/B6/B8/B19
2G: GSM: B3/B5/B8
Support 4x4 MIMO antenna technology/HPUE/HORxD
Note ①: Whether 5G is supported depends on the local operator network; when using a telecom card as a non-Internet card, you need to activate the HD voice service. If it is not activated or the local network does not support the HD voice service
, it cannot be used;
Note ②: Radio and Television does not support 2G and 3G networks; Radio and Television
does not support MMS services; Note ③: TD-SCDMA standard (Mobile 3G) is not supported; CDMA 2000 EVDO standard (Telecom 3G) is not supported; CDMA 1X standard (Telecom 2G) is not supported; NSA
standard (5G non-independent networking) is not supported;
Note ④: Dual-card dual-pass only supports some frequency band combinations of 5G+5G and 5G+4G, and supports HD voice services of Mobile/Unicom/Telecom/Radio and Television. The actual usage depends on the operator's
local network and service deployment.
Data connectivity
WLAN protocols: Wi-Fi 7, Wi-Fi 6, Wi-Fi 5, Wi-Fi 4 and 802.11a/b/g
WLAN frequency: 2.4G Wi-Fi | 5G Wi-Fi
supports 2x2 MIMO, Wi-Fi Direct, Miracast
Bluetooth Bluetooth 5.4
supports: SBC / AAC / Aptx / LDAC / LHDC 5.0
Navigation and positioning
Beidou: B1I + B1C + B2a | GPS: L1 + L5 | Galileo: E1 + E5a
GLONASS: G1 | QZSS: L1 + L5 | NavIC: L5
AGNSS | Data network positioning | Wi-Fi network positioning | Sensor-assisted positioning
Video and Audio
Dual stereo speakers
MP3, FLAC, AAC, OGG, WAV, AMR, AWB
Hi-Res Audio Certified | Hi-Res Wireless Certified | Dolby Atmos
Video playback
MP4, MKV, WEBM, 3GP playback
support HDR10/10+ video
sensor
Ultrasonic distance sensor | 360° front and rear dual light sensors | Accelerometer | Electronic compass | Gyroscope | Infrared remote control
Flicker sensor | X-axis linear motor
NFC function
After activating NFC-related services in the wallet app, you can use transportation cards, Mi Pay, door cards,
car keys and other functions by double-clicking the power button.
Transportation cards: Support 300+ cities, and support 40+ bus cards to be migrated from old phones to new phones for free. (
The cities supported by transportation cards vary due to technical conditions and cities, etc., and are subject to actual conditions; the available scope of card terminals and travel
discounts are subject to the release of local governments and operating companies.)
Mi Pay: Supports online App payment, offline card swiping, QR code payment, and UnionPay label touch payment. QR code payment
supports the main scan and scanned payment of UnionPay standard QR codes, and the main scan payment of standard QR codes such as Alipay and WeChat.
Door cards: physical door cards, smart door locks, community door cards, and custom blank cards. (Only door cards with a frequency band of 13.56MHz can be simulated
. Even if the simulation is successful, bank cards with door card functions and door cards with stored value consumption, public transportation consumption and other functions
will not have bank and public transportation functions)
Car key: supports mobile phone NFC unlocking, engine start and other functions.
The specific number of supported cities, city names, banks, number of cards, car key cooperation models, etc. are subject to actual conditions.
For more information, please refer to (https://www.mipay.com)
Mobile phone host / power adapter / USB Type-C data cable / pin / mobile phone protective case / instruction manual (including three-guarantee certificate)
screen protector (attached to the phone at the factory)
* This list only describes the whole machine packaging. Depending on the sales package, the accessory sets provided outside the whole machine packaging may be slightly different. Please refer to the user's selection at the time of purchase.
Harry Potter Edition
Mobile phone host / power adapter / USB Type-C data cable / customized pin / customized mobile phone protective case / instruction manual
(including three-guarantee certificate) / screen protector (attached to the phone at the factory) / sticker × 3
Special Note: 1. In terms of memory and capacity, the actual available capacity will be reduced and vary due to many factors: because the operating system occupies part of the memory (RAM), the actual available space is less than the indicated memory capacity; because the installation of the operating system and pre-installed programs occupy part of the storage (ROM), the actual available storage space is less than the indicated storage capacity. 2. The screen images and product description display images provided on this website are all reference schematics, and the actual situation is subject to the actual product. 3. Product images, models, data, functions, performance, specifications, user interfaces and other product information are for reference only. Redmi may improve the above content. For specific information, please refer to the actual product and product manual. 4. Unless otherwise specified, the product site is all our laboratory data, design technical parameters and data provided by suppliers. The actual situation of the data on the entire site will vary slightly due to different test software versions, specific test environments, and specific versions. The structural pictures displayed on the entire site are all functional schematics, not absolute actual structures. The actual situation is subject to the actual product.